Shark Rotator Professional Lift-Away – NV501

Verifiedupright

US-market Lift-Away upright vacuum from Shark's NV500 series. Shark lists the Pre-Motor Filter Kit XFF500 and the Post-Motor HEPA Filter XHF500 for the NV501, plus Flexible Hose 1245FC500, Hose Elbow 1186FC500 and Motorized Floor Nozzle 1246FC500. Verified from Shark's own parts and support pages.

Quick buy

Opens an Amazon search for the exact part number. Affiliate links: we may earn a commission at no extra cost to you.

Market
US
Last verified
2026-11-19
Also searched as (13)

NV501, Shark NV501, Shark Rotator NV501, Rotator Professional Lift-Away, NV500 series, Shark NV501 filter, Shark NV501 HEPA filter, XFF500, XHF500, 1245FC500, 1246FC500, NV501 hose, NV501 floor nozzle

Before you buy

7 notes
  • This record applies to the U.S. Shark Rotator Professional Lift-Away NV501. Shark's support site groups it in the NV500 series (NV500, NV501, NV502 and other variants), but every part below is listed because its own Shark part page names NV501.
  • Filters: Shark's NV500-series FAQ says to rinse the pre-motor foam and felt filters in lukewarm water until the water runs clear and to air-dry them for at least 24 hours; refit the felt filter first, then the foam filter. The HEPA filter is rinsed dirty side down and air-dried for 24 hours.
  • Shark gives no fixed interval for this series: it recommends cleaning the filters regularly and tapping them clean between washes. Do not put filters in the dishwasher or washing machine.
  • Brush roll: Shark lists no separate brush roll for NV501. It sells the complete Motorized Floor Nozzle (1246FC500), which it describes as the part that contains the brushroll.
  • No belt appears in Shark's parts list for NV501.
  • Shark's parts list for NV501 also includes a replacement pod, dust cup, filter frame, accessory bag and a microfiber pad that are not catalogued here.
  • No aftermarket equivalence is claimed on this page.

Compatible parts (13)

Filters

PartPart numberConfidenceBuyWhy it fits
Pre-Motor Filter KitShark (OEM)XFF500confirmedCheck price on Amazon

Affiliate linkOther shops

Why it fits, sources

Shark's part page lists NV501 under 'Compatible with'. Shark names it a Pre-Motor Filter Kit and does not itemise the contents on the part page. Shark's FAQ describes the pre-motor filters as a foam filter and a felt filter, rinsed and air-dried for at least 24 hours.

Post-Motor HEPA FilterShark (OEM)XHF500confirmedCheck price on Amazon

Affiliate linkOther shops

Why it fits, sources

Shark's part page lists NV501 under 'Compatible with'. Rinse dirty side down and air-dry for 24 hours per Shark's FAQ.

Hoses

PartPart numberConfidenceBuyWhy it fits
Flexible HoseShark (OEM)1245FC500confirmedCheck price on Amazon

Affiliate linkOther shops

Why it fits, sources

Shark's part page lists NV501 under 'Compatible with'. Shark: replacement hose that maintains the flow of debris into the dust cup.

Hose ElbowShark (OEM)1186FC500confirmedCheck price on Amazon

Affiliate linkOther shops

Why it fits, sources

Shark's part page lists NV501 under 'Compatible with'.

Attachments

PartPart numberConfidenceBuyWhy it fits
Motorized Floor NozzleShark (OEM)1246FC500confirmedCheck price on Amazon

Affiliate linkOther shops

Why it fits, sources

Shark's part page lists NV501 under 'Compatible with'. Shark: this portion of the vacuum contains the brushroll and swivel steering mechanism. Sold as a complete nozzle; no separate brush roll is listed.

Extension WandShark (OEM)1180FC500confirmedCheck price on Amazon

Affiliate linkOther shops

Why it fits, sources

Shark's part page lists NV501 under 'Compatible with'. Shown as out of stock on Shark's site on the verification date.

Back Saver WandShark (OEM)XBS500confirmedCheck price on Amazon

Affiliate linkOther shops

Why it fits, sources

Shark's part page lists NV501 under 'Compatible with'. Optional wand.

Dusting BrushShark (OEM)1185FC500confirmedCheck price on Amazon

Affiliate linkOther shops

Why it fits, sources

Shark's part page lists NV501 under 'Compatible with'.

Multi-Angle Dusting BrushShark (OEM)X15FC500confirmedCheck price on Amazon

Affiliate linkOther shops

Why it fits, sources

Shark's part page lists NV501 under 'Compatible with'. Optional tool. Shown as out of stock on Shark's site on the verification date.

12" Crevice ToolShark (OEM)X11FC500confirmedCheck price on Amazon

Affiliate linkOther shops

Why it fits, sources

Shark's part page lists NV501 under 'Compatible with'. Shown as out of stock on Shark's site on the verification date.

Wide Upholstery ToolShark (OEM)X17FC500confirmedCheck price on Amazon

Affiliate linkOther shops

Why it fits, sources

Shark's part page lists NV501 under 'Compatible with'.

Mini Blinds ToolShark (OEM)XMB500confirmedCheck price on Amazon

Affiliate linkOther shops

Why it fits, sources

Shark's part page lists NV501 under 'Compatible with'. Optional tool.

Mini Pet BrushShark (OEM)XPB500confirmedCheck price on Amazon

Affiliate linkOther shops

Why it fits, sources

Shark's part page lists NV501 under 'Compatible with'. Optional tool.

Questions and answers

Which filters fit the Shark Rotator Professional Lift-Away – NV501?

Verified filters for the Shark Rotator Professional Lift-Away – NV501: Pre-Motor Filter Kit (part number XFF500); Post-Motor HEPA Filter (part number XHF500).

Which hoses fit the Shark Rotator Professional Lift-Away – NV501?

Verified hoses for the Shark Rotator Professional Lift-Away – NV501: Flexible Hose (part number 1245FC500); Hose Elbow (part number 1186FC500).

Which attachments fit the Shark Rotator Professional Lift-Away – NV501?

Verified attachments for the Shark Rotator Professional Lift-Away – NV501: Motorized Floor Nozzle (part number 1246FC500); Extension Wand (part number 1180FC500); Back Saver Wand (part number XBS500); Dusting Brush (part number 1185FC500); Multi-Angle Dusting Brush (part number X15FC500); 12" Crevice Tool (part number X11FC500); Wide Upholstery Tool (part number X17FC500); Mini Blinds Tool (part number XMB500); Mini Pet Brush (part number XPB500).

How was this Shark Rotator Professional Lift-Away – NV501 compatibility data verified?

It was last checked on 2026-11-19 against 4 manufacturer sources: Shark — parts & accessories filtered to compatible model NV501; Shark Support — NV500 Series Rotator Professional Lift-Away FAQs (SKUs incl. NV501); Shark — Pre-Motor Filter Kit (XFF500); Shark — Post-Motor HEPA Filter (XHF500). No aftermarket equivalence is inferred.

Sources checked for this model

Affiliate disclosure:“Where to buy” links lead to marketplace searches; those marked “affiliate” may earn us a commission at no extra cost to you. They never influence which parts are listed or how they are rated. Report an error on this page. Markdown version of this page.